iJoy RDTA Box 200W Box Mod

$74.95

iJoy RDTA Box 200W Box Mod

Now available at Wick & Wire Co. Melbourne's largest Vape Shop.

The iJoy RDTA Box 200W Starter Kit is the culmination of design and engineering of iJoy, integrating the critically acclaimed iJoy Combo RDTA platform into a cleverly designed box mod chassis that features an easily fillable 12.8ml tank capacity and a dual battery powered 200W chipset. Designed as a flagship system that covers power, versatility, and longevity, the RDTA Box is a unique and industry leading platform that excels in each of those categories, packing in a unmatched 12.8ml tank capacity with the incredibly versatile iJoy IMC Interchangeable Deck system. The reservoir of the RDTA Box has been integrated into the top portion of the chassis, allowing for efficient use of the design, with a dedicated 15mm diameter fill port in which users can quickly and easily refill the entire tank. The IMC system allows for flexible use and integration of iJoy's entire family, with up to eleven total build deck options (sold separately) that cover the entire spectrum of needs and features. Included with each set is the two post IMC3 deck that provides a flexible and versatile build deck alongside the new IMC Coil 0.15 ohm that features a prebuilt coil design intended to be powered between 50 to 100W. The RDTA Box features a new IWEPAL powered chipset capable of 5 to 200W of output across four output modes, full temperature control support, and a vibrant, vertically stacked 0.96 inch OLED screen. The device is powered by dual high amperage 18650 batteries (sold separately) loaded from the sliding battery door located at the side of the chassis. Unrivaled in capacity and versatility while packing in a 95% Power Efficient IWEPAL chipset capable of up to 200W, iJoy's RDTA Box 200W Starter Kit entrenches itself as this year's ultimate builder orientated all in one system. 

Now available in store from our Melbourne Vape Shops located in Cheltenham and Nunawading or Order online for prompt delivery Australia Wide!

Please Note: Batteries must be matched in brand, model, sizing and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.


Product Features:

  • 5 to 200W Output
    • 0.05 to 3.0 ohm Minimum Atomizer Resistance
    • 1 to 9V Output
    • 1 to 45A Output
    • Four Setting Output Mode
      • Hard
      • Normal
      • Soft
      • User
        • Customized Working Waveband
    • Firmware Upgradeable
    • 95% Power Efficiency
  • Temperature Control Suite
    • Ni200 Nickel Support
    • Titanium Support
    • Stainless Steel Support
    • Adjustable Initial Resistance
    • 300 to 600 Degrees Fahrenheit Output Range
    • 0.06 to 3.0 ohm Atomizer Resistance Range
  • 0.96" OLED Screen
    • Vertically Stacked Matrix
    • Output Wattage and Temperature
    • Output Voltage
    • Mode and Heating Element
    • Atomizer Resistance
    • Output Current
    • Battery Life Indicator
    • Rotating Screen
    • Atomizer Resistance
    • LED Light Set
  • Sliding Battery Door
    • Dual 18650 Battery Powered
      • Sold Separately
  • Integrated Combo RDTA Platform
    • IMC Interchangeable Build Deck System
      • IMC3 Deck (Preinstalled)
        • Two Post
          • Dual Terminal Per Post
          • 2.5mm Diameter per Terminal
          • Side Mounted Phillips Screws
        • Dual Coil Compatible
        • Quad Wicking Ports
          • Sidewall Cutouts
      • IMC Coil 0.15 ohm
        • Prebuilt Sub-Ohm Coil
        • Ceramic Deck
        • 50 to 100W
        • Organic Cotton Wicking
  • Full Range Tank Reservoir
    • 12.8ml Tank Capacity
    • Top Fill Design
      • Dedicated Threaded Fill Port
      • 15mm Diameter
      • Pour to Fill
  • Dual Adjustable Airflow
    • 15mm by 1.5mm Each Airslot
    • 10mm Wide Bore Drip Tip
  • Stainless Steel 510 Connector
    • Spring Loaded Brass 510 Pin
  • PCB Temp/Low Battery/Atomizer Short/Low Resistance Protectio

Product Dimensions:

  • 55mm by 28mm by 135mm

Product Includes:
  • One iJoy RDTA Box
  • One IMC3 Deck
  • One IMC Coil 0.15 ohm
  • One Silicone Cap Cover
  • One Silicone RDTA Plug
  • One Phillips Screwdriver
  • One Hard Bristle Nylon Brush
  • Two Prebuilt Fused Clapton Coils
  • Two Strips of Organic Cotton
  • Spare Parts Pack
  • Micro USB Cable
  • User Manual

Related products