VOOPOO DRAG 2 REFRESH STARTER KIT

VooPoo DRAG 2 REFRESH Starter Kit

Now available at Wick and Wire Co. Melbourne's largest Vape Shop.

VooPoo presents the VooPoo Drag 2 Refresh Starter Kit, a combination of the Drag 2 177W Gene.FIT Chip Box Mod and the PNP Tank. The upgraded Gene.FIT chip is secured by a V0 class fireproofing bridge to block liquid, dust, or burnout. The new chip has an increased 5 to 177W power output, 0.05 to 5.0 ohm resistance, 0 to 7.5V output, and 40A max current output. The Drag 2 now features FIT Mode, allowing the device to auto detect optimal power output for the installed sub-ohm tank and allows the user to select from three preset levels. Fit 1 is Battery Setting, allowing the user to conserve battery at the lowest recommended output for the installed coil head. Fit 2 is Flavor Setting, which gives medium output with an emphasis on flavor production. Fit 3 is Cloud Setting which provides maximum power for maximum cloud production. The VooPoo Drag 2 has a 5 bank memory for user defined settings. The new Gene.FIT chip also comes with a temperature control suite that has an atomizer resistance of 0.05 to 1.5 ohm, temperature range of 200 to 600 Degrees Fahrenheit and is compatible with nickel, titanium, and stainless steel. VooPoo has retained the magnetic battery access door that houses two 18650 batteries (sold separately) as well as the three button control scheme with an enlarged firing button and two adjustment buttons. Drag 2 box mod has a 0.91 Inch OLED display that shows temperature mode and output, output power, atomizer resistance, and battery life indicator. The body of the Drag 2 is 25% smaller than the previous design but retains the beautiful zinc alloy frame, DRAG lettering on the fixed panel, and a gorgeous resin magnetic battery panel. On top of the device is a spring loaded gold plated 510 connection with a stainless steel thread point. This box mod also comes with a host of protections such as battery reverse protection, over charge protection, and balanced battery charging. VOOPOO PNP Pod Tank is a new type of Tank, which can be flexibly switched between POD and TANK, with a capacity of 2ml, and double intake hole design. It matches perhaps the most abundant and excellent PnP coils; Magnetic absorption makes coil change and oil filling never so simple; The adjustable air 510 base matches almost all of your devices. Drag 2 Refresh Edition equipped with two PnP coils of 0.15ohm and 0.2ohm. They will let you feel the PnP coils of a big cloud with incredible flavors. Drag 2 Refresh Edition also compatible with all PnP coils, just pull and push.

You can find replacement coils for this kit here.

Batteries are sold separately, you can find them here.

Now available in store from our Melbourne Vape Shops located in Bundoora, Dandenong, Cheltenham Nunawading and Pakenham or Order online for prompt delivery Australia Wide! 

Specifications
  • Size: 51*26.5*134.4mm
  • Material: Zinc Alloy+ Resin (Black)
  • Battery: Dual 18650 (Not Supplied)
  • Chipset: GENE.FIT
  • Power Range: 5-177W
  • Resistance Range: 0.05-5.0Ω
  • Temperature Range: 200-600℉/100-315℃
  • Innovative Mode: FIT Mode
  • Output Current: 0-40A
  • Output Voltage: 0-7.5V
  • Thread: 510 thread
  • Capacity: 2ml (TPD)
  • Standard Coils: PnP-VM6 0.15ohm / PnP-VM5 0.2ohm
  • Compatible Coils: All of PnP coils
  • Material of pod: PCTG
  • Whats in the box?
  • 1x DRAG 2 177W Device
  • 1x PnP Pod Tank (2ml)
  • 1x PnP-VM5, 0.2Ω
  • 1x PnP-VM6, 0.15Ω
  • 1x USB Cable
  • 1x User Manual
  • 1x GENE Chip Card
  • 1x Warranty Card